Tankless Water Heaters – Are They Right For You?

Hot water circulating pumps and systems. How they work and the pros and cons of several systems and pumps

Home

Electric Water Heaters

Electric Water Heater Operation

Electric Water Heater Repair 
Guide

Gas Water Heaters

Gas Water Heater Operation

Gas  Repair Guide

Flushing Your Water Heater

Heat Pump Water Heaters

Tankless Water Heaters

Residential Plumbing
Systems

Traditional Type
Circulating Systems

Cold Water Return 
Type Systems

Thermo siphon
Type Circulating 
Systems

Article Index

Tankless Water Heaters – Are They Right For You?

Traditional tank-type water heaters vs. tankless type water heaters

Tankless water heaters are promoted as being “green” in that they save energy.  Well lets take a good look at tankless water heaters and figure out what the real story is.  Like anything else, there are both pros and cons.

Let’s begin by examining the traditional tank-type water heater.  Basically you have a big barrel of water with a fire under it.  (We will get to electric water heaters shortly.)  If you put the fireplace right under the barrel with the chimney through the center of the barrel then you have a pretty good idea of how a gas water heater heats the water.

The gas flames are not very big, so it takes up to an hour to heat that barrel of water.  Having that barrel of hot water is very handy.  You can take a shower and have plenty of hot water. With a big barrel several people could take showers without running out of hot water.  If you want just a trickle of hot water you just adjust the faucet.  Filling a bathtub quickly is no problem.  Usually a bath faucet will produce a much larger flow than sink or shower fixtures.  That way you can fill up the bathtub quickly before the water has a chance to cool off.

An electric tank type heater works in a similar fashion.  Heating elements similar to electric stove burners are submerged in the tank and heat the water.  Heating water with electricity takes much longer since the heating elements used in tank type water heaters are not that powerful.  Heating water with electricity is also much more expensive.

Storage or tank-type water heaters are not perfect.  Gas heaters have to have the little pilot light burning all the time, and although small, it does consume energy.  Even though that big barrel of hot water is very well insulated it still leaks out some heat.  This is known as standby loss. Standby loss is what the tankless water heaters do not have.

Tankless hot water heaters

Now we can examine tankless water heaters.  A tankless water heater can be thought of as a long piece of pipe coiled up and put over that fire.  As water flows through the tube, the fire heats it up.  A never ending supply of hot water!

Of course, if the tube is only a few feet long, the water won’t be exposed to the heat of the fire long enough to heat it very much, especially if the water is flowing real fast through the pipe.  So it’s a long piece of pipe or tubing. When water is not flowing through the pipe the gas burner is not turned on.

To turn on the burner water must flow in the pipe.  When you turn on your fixture, a flow switch inside the heater turns on the burner. So there is no pilot light energy being used.  And since there is no big barrel of water to keep hot, there is no standby loss either.  All is well with the world.

As with the tank-type heater, the tankless heater is not perfect either.  Since there is no big barrel of hot water, when you turn on your hot water you will not only have to wait for it to make it through the house piping, but first it must travel all the way through that long pipe.  So it will take longer to get your hot water.  This means you will likely run more water down the drain than with the tank water heater, and thus waste more water.

Tankless water heaters need a minimum flow rate to operate

Another downside is that to turn on the flow switch you need to have at least ½ gallon per minute of flow and usually more to turn on the heater.  Less than that and the heater will not come on.  So if you want to use just a trickle of hot water you need that big barrel of hot water.

Want to fill your bathtub…it might not be that easy.  Typically tankless units won’t be able to match the flow rate of a bathtub faucet, so it will take longer to fill the tub…possibly a lot longer.  The bath water might cool off before the tub gets full.

The average temperature of the water going into your dishwasher will be lower, possibly causing the dishes to not be as clean. (More cold water must be run out of your system before the hot water arrives…and with a dishwasher the amount is small enough it may not even get any hot water for the first cycle.